Conical pole buried/with plate
Overview
- Poles made of 70 micron hot-dip galvanised EN10025- S235JR in compliance with the UNI EN ISO 1461 (EN40-5) standard.
- The poles are subjected to a hot-dip galvanisation process followed by a pre-treatment for removing organic contaminants.
- A chemical treatment is then applied to create the correct level of adhesion for the next phase of powder coating followed by a phase of polymerisation in a ventilated oven to ensure the curing process for the paint film is complete.
- The treatment and painting cycle guarantees a C4-H durability class in compliance with the UNI EN ISO 12944 standard.
- Treatment and paint cycles with a durability class of C5-H are available on request.
- Conical shape with a base diameter from Ø100 to Ø158mm in compliance with the height of the pole and a final diameter of 60 mm for all heights.
- All the conical poles have a 200m high, Ø60mm cylindrical section in the upper part of the pole to facilitate the installation of all products with a Ø60mm internal shank.
- The buried poles are fitted with a slot for feeding in cables (150x150mm).
- Anchor plate for poles with a 70 micron hot-dip galvanised steel plate with 4 slots.
- Counterplate and anchoring bolts need to be ordered separately.
- Poles with an IP54 “patch” access cover (186x45mm) are earthed outside the base of the pole.
- Class II terminal block with single or double fuse holder, four poles with three connections each; and 6 to 16 mm2 input and 2.5 mm2 output cables to be ordered separately (codes 1862 - 1864 - 1865).
- Terminal blocks code 1862-1864-1865 are IP43 | IK08.
- Poles with an IP54 “patch” access cover ( 186x45mm) are earthed outside the base of the pole