Tapered pole buried/with plate
Overview
- Poles made of 70 micron hot-dip galvanised EN10025- S235JR or EN10025-S355JR steel in compliance with the UNI EN ISO 1461 (EN40-5) standard.
- The poles are subjected to a hot-dip galvanisation process followed by a pre-treatment for removing organic contaminants.
- A chemical treatment is then applied to create the correct level of adhesion for the next phase of powder coating followed by a phase of polymerisation in a ventilated oven to ensure the curing process for the paint film is complete.
- The treatment and painting cycle guarantees a C4-H durability class in compliance with the UNI EN ISO 12944 standard.
- Treatment and paint cycles with a durability class of C5-H are available on request.
- Shape consisting of two cylindrical sections with a diameter of Ø127/102 mm, Ø159/102 mm or 194/120 mm.
- In the upper part of the poles (codes: 1544-1545-1546-1547-1548-1552-1554--- -1597-1598-1599) there are six pass-through holes and stainless steel threaded inserts to allow the arm to be fixed with a tie-rod (for Lavinia, Platea Pro, Wow and Street systems).
- The buried poles are fitted with a slot for feeding in cables (150x150mm).
- 70 micron hot-dip galvanised steel anchor plate with 4 slots/holes.
- Counterplate and anchoring bolts need to be ordered separately.
- Class II terminal block with single or double fuse holder, four poles with three connections each; and 6 to 16 mm2 input and 2.5 mm2 output cables to be ordered separately (codes 1862 - 1863 - 186 - 1865).
- Terminal blocks code 1862-1865 are IP43 | IK08; terminal block code 1863 is IP44 | IK08.
- Poles with an IP54 “patch” access cover (186x45mm) are earthed outside the base of the pole.
- Poles with an IP44 (310x95mm ) and IP3X (310x95mm) flush access cover are earthed inside.