iWay Retrofit Kit - square Super Comfort bollard
Overview
- High visual comfort optical assembly retrofit kit designed to use LED lamps for iWay square bollards and relamping existing metal halide or fluorescent lamp systems.
- The Retrofit Kit reduces the energy and maintenance costs of existing metal halide or fluorescent lamp systems by offering energy savings of up to 80% and guaranteeing rapid ROI for the new LED system.
- Ground/floor installation.
- Retrofit kit made of die-cast aluminium with a polycarbonate screen incorporating an LED circuit with a super-pure aluminium reflector and a DALI electronic power supply unit protected against mains overvoltages.
- Pole retrofit kit made of extruded aluminium with a sheet aluminium lamp cover and a die-cast aluminium alloy base for fixing to the ground. The poles, lamp covers and base are available in White, Black, Rust Brown and Grey.
- DALI electronic power supply unit, Midnight programmable using NFC technology (version Ø170mm/170x170).
- Contact temperature < 50°C.
- All the screws used are made of A2 stainless steel.
- Dark Sky Approved: the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following:
- Maximum Correlated Color Temperature of 3000K.
- Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone.
- Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed.
- Luminaires must have dimming capability to 10% full rating.
Protection Ratings
-
Class II -
IP66
Mechanical Resistance
-
Protected against 20 J shocks
Certifications & Approvals
-
BVB Byggvarube- dömningen -
CCC S&E -
CE -
ENEC-03 -
PEP Ecopassport -
UK Conformity Assessed -
BIS -
DARKSKY -
QCERT
Key Features
-
Dimmable luminaire -
Compatibility with DALI protocol -
Spike protection