Outdoor / Pole & wall mounted systems / Street / pole-top 529x268mm

Street pole-top 529x268mm

Urban lighting system intended for use with LED light sources.
Installation on poles with pole-tops and lateral arms or whip-type poles with terminals measuring ø 42 to ø 60mm or ø 60 to ø 76 mm.
Optical compartment in die-cast aluminium; hot dip galvanised steel tubular arms; sodium-calcium tempered protection glass, with 5 mm thickness.
No upwards dispersion of the luminous flux.
Adjustable optical compartment
High visual comfort.
High yield optics (Opti Smart Lens) (with polymer optic lenses and uniform light distribution).
No photo-biological risks. This luminaire is in the “Exempt Group” (no risk linked to infrared, blue light and UV radiation) in accordance with EN 62471:2008.
The luminaire can be programmed using the interface for luminous fl ux adjustment.
The luminaire is supplied in Midnight mode and can be converted into ON-OFF mode using the same interface.
DALI driver compatible with remote management systems.
Overvoltage protection: 10kV in Common Mode (CM), 6kV in Differential Mode (DM).
An active control system changes the current intensity in order to maintain the lifespan of the LEDs even under extreme thermal conditions.
All external screws used are in A2 stainless steel.
Product equipped with Nema 7-PIN Dali Fitting complete with protective cap.
For outgoing cable version: in the case of installations on insulated supports (e.g. fibreglass poles), please contact us to request a customised product equipped with an accessory that protects the device from possible failure due to electrostatic charges.
For version without outgoing cable: in the case of installations on insulated supports (e.g. fibreglass pole), the use of accessory X899 is mandatory (or strongly recommended) in order to protect the luminaire from possible failures due to electrostatic charges.
Dark Sky Approved: the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following:
- Maximum Correlated Color Temperature of 3000K.
- Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone.
- Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed.
- Luminaires must have dimming capability to 10% full rating.

Protection Ratings

Class II
IP67
IP65
IP66

Mechanical Resistance

Protected against 2 J shocks
Protected against 10 J shocks

Certifications & Approvals

AEMO
BVB Byggvarube- dömningen
CE
ENEC-03
PEP Ecopassport
UK Conformity Assessed
Zhaga-D4i
BIS
DARKSKY
QCERT

Key Features

Graduated scale and mechanical aiming lock
Compatibility with DALI protocol
Opti Smart
No upward emission of the light flow
Suitable for extreme conditions
F Mark