Twilight Canberra pole-top
Overview
- Pole and applique street lighting system for use with LED light sources.
- Optical compartment in die-cast aluminium; PMMA protection diffuser, 3 mm thickness (IK10);
- Versions with street optics and the Optismart Lenses system, versions with symmetrical/elliptical optics comprising upper reflector in super-pure anodised aluminium, methacrylate lens and lower refl ector in metallic PMMA.
- High visual comfort.
- No photo-biological risks.
- This luminaire is in the “Exempt Group” (no risk linked to infrared, blue light and UV radiation) in accordance with EN 62471:2008.
- DALI versions compatible with remote management systems and Midnight versions.
- Installation on poles with ø 60 or ø 76 mm terminal.
- Applique installation.
- All external screws used are in stainless steel.
- Product equipped with Nema 7-PIN Dali Fitting complete with protective cap.
- In the case of installations on insulated supports (e.g. fibreglass poles), please contact us to request a customised product equipped with an accessory that protects the device from possible failure due to electrostatic charges.
- Dark Sky Approved: the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following:
- Maximum Correlated Color Temperature of 3000K.
- Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone.
- Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed.
- Luminaires must have dimming capability to 10% full rating.
Protection Ratings
-
Class II -
IP66
Mechanical Resistance
-
Protected against 20 J shocks
Certifications & Approvals
-
AEMO -
BVB Byggvarube- dömningen -
CE -
ENEC-03 -
UK Conformity Assessed -
BIS -
DARKSKY -
QCERT
Key Features
-
Compatibility with DALI protocol -
No upward emission of the light flow -
F Mark